Skip to content

Powders · Paints & coatings

Automated powder storage and dosing for chemical formulations

Nine silos, a big-bag unloading station, thirty screw conveyors and three weigh batchers organise the supply of mineral fillers and pigments to mixing equipment. Wolmec engineered the powder section and its interfaces with the wider formulation process.

Nine-silo powder storage installation
Bulk storage
9 silos · 80–100 m³ each
Mechanical transfer
30 screw conveyors
Gravimetric dosing
3 weigh batchers
Design production
50 t / day

The customer requirement

Preparing mineral fillers and pigments for production

The powder section had to operate within a wider factory project involving other suppliers. Its layout, discharge points and automation needed to coordinate with the mixing equipment and the liquid ingredients used in the formulations. The powder section was designed for 50 tonnes per day in this installation.

Calcium carbonate, titanium dioxide, sand, quartz and kaolin have different roles in a chemical formulation. Their supply to production needs to follow the ingredients, quantities and sequence required by each recipe. In this project, Wolmec connected bulk storage, complementary big-bag loading, mechanical conveying and gravimetric dosing with the customer’s mixing process.

Wolmec project scope

  • Nine bulk powder silos of 80–100 m³ each
  • One complementary big-bag unloading station
  • Thirty screw conveyors and three weigh batchers
  • Integrated dust extraction for the powder section
  • Automation interfaces with mixing and liquid additions

Inside the engineering

The powder section, from storage to weighing

01

Organise bulk ingredients and complementary big-bag supply

Nine silos hold the main powder ingredients, with individual capacities between 80 and 100 m³. A big-bag unloading station provides an additional loading route for complementary raw materials. This arrangement connects the way ingredients are purchased and stored with their frequency of use in production. Silo numbers, capacities and the role of bagged ingredients are chosen around the customer’s consumption and recipe portfolio.

Nine-silo powder storage installation
02

Bring thirty transfer routes into controlled weigh batching

Thirty screw conveyors move powders through the section, while three weigh batchers establish the quantities required by the process. The conveyors and weighing equipment were developed together with the destinations they supply. That connection matters when a formulation contains several mineral fillers and pigments: storage availability, dosing quantities and transfer operations all have to support the preparation of the batch.

Weigh batcher and connected powder screw conveyors
03

Include dust extraction in the powder-handling layout

An integrated extraction system forms part of the powder section. Loading points, conveying connections and dosing operations are considered alongside the arrangement of the equipment. For a new installation, extraction requirements depend on the powder properties, the handling operations and the available layout. The extraction system was integrated with the loading, transfer and dosing equipment as part of the powder-handling layout.

Pipework and dosing equipment beside the platform
04

Coordinate the powder section with other process suppliers

The automation connects powder preparation with the mixing operations and the liquid additions required by the formulation. Wolmec supplied the powder-handling section. Equipment placement and interfaces were coordinated with the other companies involved in the factory project. This makes the reference relevant both to a new multi-supplier plant and to an existing production line whose upstream ingredient preparation needs to be updated.

Conveying equipment installed within the production building

The material route

How the ingredients reach the mixing process

  1. 01Bulk and big-bag supply
  2. 02Powder storage
  3. 03Screw conveying
  4. 04Gravimetric batching
  5. 05Transfer to mixing
  6. 06Coordination with liquid additions

A powder supply that follows the formulation

The control system coordinates powder handling with the mixing process and its liquid ingredients. The engineering boundary covers the powder section and the agreed mechanical and automation interfaces with the other equipment suppliers.

From raw-material inventory to prepared recipe quantities

The project brings silo storage, big-bag loading, screw transfer, weighing and extraction into an automated powder section connected to the formulation process. The powder section was designed for a production of 50 tonnes per day in this installation.

  • Main powders and complementary big-bag ingredients share an organised route into recipe preparation.
  • Three weigh batchers establish the powder quantities required before transfer to mixing.
  • Defined mechanical and automation interfaces connect the powder section with the wider plant and its other suppliers.

From this plant to your application

A process developed around your product

The strongest fit is a formulation process that consumes several powders and needs organised storage, weighed quantities and defined connections to mixing.

Paints and coatings

Prepare mineral fillers and pigments for formulations that also include liquid ingredients.

Materials, cleaning requirements, dosing tolerances and mixing interfaces are assessed for each application. The powder section can be developed around the other process equipment in a new or existing factory.

Practical questions

Planning an automated powder section

Start with the ingredient-to-destination map, then define the storage, weighing and transfer operations.

Can the powder section be added to existing mixing equipment?

It can be developed as a defined part of a wider process. This project combines a dedicated powder section with interfaces to mixing and liquid additions. A retrofit assessment identifies the mechanical connections, control interfaces, available space and installation window.

Can bulk silos and big-bag loading work together?

Yes. This installation combines nine silos with one big-bag unloading station. The arrangement for another factory depends on the ingredients, delivery formats, consumption and frequency of use.

What does the 50 tonnes per day figure mean?

It is the design production figure reported for this project configuration. A new line is sized using batch quantities, recipe mix, operation times and shifts. The figure does not define the instantaneous capacity of every conveyor.

How are interfaces between different suppliers managed?

The layout and control connections must identify who provides each piece of equipment and how powders reach the mixing process. This reference includes coordination with other companies involved in the factory and with the liquid additions required by the formulations.

Bring your production plans

Map the ingredients and machines your line needs to feed

A factory can have adequate mixing capacity while ingredient preparation remains the part that needs attention. This reference shows how the supply of mineral fillers and pigments can be engineered as a defined project, whether the customer retains existing mixers or develops a new factory with several suppliers.

  • Products, recipes and powder characteristics
  • Ingredients supplied in bulk and in big bags
  • Consumption, batch weights and dosing tolerances
  • Mixers to feed and existing liquid-addition sequence
  • Available layout, extraction and control interfaces

Share the ingredients your factory uses, the quantities it consumes and the machines that need to receive them. We can assess the powder section together with the production process and the other equipment interfaces.

Plan your powder feeding line

You can include a layout, tender or technical brief with your enquiry

From site to installation

See the transformation

Before

Factory site before the bulk powder storage installation

After

Nine-silo powder storage installation

In the field

More plants to explore

All projects

Powders · Dry formulations

Multi-ingredient powder batching and mixing plant

An integrated premix production line for multiple recipes and different dose ranges. Bulk raw materials, additives and direct-to-mixer micro-dosing come together with pneumatic conveying, horizontal mixing and automatic bag packaging.